New research shows how arrays of tiny electronic devices can achieve human-skin-like sensitivity to mechanical force.
Arrays of transistors made of nanowires could form the basis of a new class of devices nearly as sensitive to mechanical force as human skin is. The inventor of the technology, Zhong Lin Wang, a professor of materials science and engineering at Georgia Tech, says it has immediate applications in human-machine interfaces. For example, it could be used to capture electronic signatures by recording the distinctive force an individual applies while signing. Down the road, says Wang, his group’s pressure sensor arrays could equip robotics and prosthetics with a human-like sense of touch.
Electronically replicating the sensitivity of the human sense of touch has proved extremely challenging. Recently, some research groups have demonstrated that micro- or nanoelectronics assembled on flexible, bendable substrates could monitor pressure changes at a fairly high level of detail and thus could potentially act as a kind of “artificial skin.” In the new research, Wang’s group demonstrates nanoelectronics that offer at least a 15-fold enhancement in sensor density and spatial resolution compared to the previous approaches. Further, the electronic properties of the nanowires allowed the researchers to demonstrate through high-resolution imaging an improvement in sensitivity of two to three orders of magnitude. The density, resolution, and sensitivity of the sensors, says Wang, is comparable to that of the skin of a human finger.
How it works ??
Made from nanoscale crystals of the semiconducting material zinc oxide, the nanowires are piezoelectric, meaning they generate an electrical charge in response to applied mechanical force. Wang and his colleagues have taken advantage of this effect, using the wires to build a new type of transistor that works without added voltage. In Wang’s nanowire transistors, the gate traditionally used in electronics is eliminated. Instead, the current flowing through the nanowires is controlled by the electrical charge generated when strain or force applied is to the transistors.
As for giving robots human-like touch sensitivity, designing better sensors is only part of the task. Perhaps the bigger challenge is integrating them into a system that can interpret the sensors’ signals and respond instantaneously. Wang says his group will now focus on developing such a system, and on even further improving the density of nanowire sensors they can fabricate on a single array.
Taken and edited from : Massachusetts Institute of Technology
Electronically replicating the sensitivity of the human sense of touch has proved extremely challenging. Recently, some research groups have demonstrated that micro- or nanoelectronics assembled on flexible, bendable substrates could monitor pressure changes at a fairly high level of detail and thus could potentially act as a kind of “artificial skin.” In the new research, Wang’s group demonstrates nanoelectronics that offer at least a 15-fold enhancement in sensor density and spatial resolution compared to the previous approaches. Further, the electronic properties of the nanowires allowed the researchers to demonstrate through high-resolution imaging an improvement in sensitivity of two to three orders of magnitude. The density, resolution, and sensitivity of the sensors, says Wang, is comparable to that of the skin of a human finger.
How it works ??
Made from nanoscale crystals of the semiconducting material zinc oxide, the nanowires are piezoelectric, meaning they generate an electrical charge in response to applied mechanical force. Wang and his colleagues have taken advantage of this effect, using the wires to build a new type of transistor that works without added voltage. In Wang’s nanowire transistors, the gate traditionally used in electronics is eliminated. Instead, the current flowing through the nanowires is controlled by the electrical charge generated when strain or force applied is to the transistors.
As for giving robots human-like touch sensitivity, designing better sensors is only part of the task. Perhaps the bigger challenge is integrating them into a system that can interpret the sensors’ signals and respond instantaneously. Wang says his group will now focus on developing such a system, and on even further improving the density of nanowire sensors they can fabricate on a single array.
Taken and edited from : Massachusetts Institute of Technology
No comments:
Post a Comment
Post your Questions here--we'll take care of it..
"Don't forget to publish your name and email ID here " so that we can mail the related files to you...